N-Tron 7014FXE2, 7014TX 28/2007 101, Set Snmp Set Community name, Set Snmp Trap Community name

Set SNMP Set Community name

Command Name	system set snmpsetcommunity
Description	To set the community name for performing snmpset operation
Syntax	system set snmpsetcommunity <Community-Name>
Parameters	Community-Name
	The name of the community to be used for performing snmpset
	operation
Example	N-TRON/Admin#[1]> system		set snmpsetcommunity private
	N-TRON/Admin#[1]> system		set snmpsetcommunity “N-
	Tron_Systems”
Notes	Arguments cannot have spaces. You can use an underscore (‘_’) instead
	of a space.
Set SNMP Trap Community name
Command Name	system set snmptrapcommunity
Description	To set the community name for raising snmp trap
Syntax	system set snmptrapcommunity <Community-Name>
Parameters	Community-Name
	The name of the community to be used for raising snmp trap
Example	N-TRON/Admin#[1]> system		set snmptrapcommunity private
	N-TRON/Admin#[1]> system		set snmptrapcommunity “N-
	Tron_Systems”
Notes	Arguments cannot have spaces. You can use an underscore (‘_’) instead of
	a space.
Show all configuration parameters
Command Name	system show config
Description	Displays the software version, the mac address, and status of gigabit ports.
Syntax	system show config
Parameters	None
Example	N-TRON/Admin#[32]system/show> config
	System Configuration	:
	Product Configuration	: 7014FX2
	Software Version	: 1.1.8
	MAC Address	: 00:07:af:ff:e5:60
	IP Configuration Mode	: manual
	System IP Address	: 192.168.1.244
	Subnet Mask	: 255.255.255.0
	Gateway Address	: 192.168.1.1
	System Name	: N-TRON Switch
	System Contact	: N-TRON Admin
	System Location	: Mobile, AL 36609
	System Up Time	: 0 days:0 hours:28 mins:43 secs
	Total Number of Ports	: 14
	Port # 1 - 12		: 10/100 Mbps Copper and/or 100
	Mbps Fiber
	Port # 13	: Gigabit Transceiver
	Port # 14	: Gigabit Transceiver
Notes

6/28/2007 page 101 of 145