N-Tron 7014FX2, 7014TX, 7014FXE2 user manual 28/2007 118, Modify an existing Vlan, Delete Vlan

Modify an existing VLAN

Command Name	vlan modify
Description	Modifies an existing VLAN.
Syntax	vlan modify <vlan id> <mgmt port>
	<at least one of: [-untagged <port mask>] or [-tagged <port mask>]>
	[-name <vlan name>] [-admit <tagged-onlyall>] [-mirror <port-no>]
Parameters	vlan-id
	unique vlan id ( 2 ~ 4094).
	mgmt port
	Management Port, yes or no (1 or 0).
	-untagged port mask
	List of ports that are to be included under this VLAN.
	Commas can be used to separate individual ports (2,5,9)
	and the range can be specified using a hyphen (10-15).
	The port numbers cannot exceed the maximum number
	of port on the board.
	-tagged port mask
	Tagged port list values can be specified in the same way as that of
	-untagged port mask.
	vlan name
	unique clan name, which can be used to identify.
	admit
	tagged-only or all. Type of packets can enter the port.
	port-no
	Optional parameter. Port number that data should be mirrored to.
Examples	N-TRON/Admin#[1]> vlan modify 2 1 –tagged 11-12 –name
	“newvlan2”
	N-TRON/Admin#[2]> vlan modify 3 1–untagged 1-10 –name “vlan
	3” –admit all
NOTES	Changing anything on a VLAN will turn on RSTP on all VLANS as a
	precautionary measure.
Delete VLAN
Command Name	vlan delete
Description	Removes an existing VLAN from the list of configured VLANs.
Syntax	vlan delete <vlan-id>
Parameters	vlan-id
	Vlan id of the existing vlan which has to be deleted
Examples	N-TRON/Admin#[1]> vlan delete 2
NOTES	Please ensure that a port based vlan with the given vlan id exists. Changing
	anything on a VLAN will turn on RSTP on all VLANS as a precautionary
	measure.

6/28/2007 page 118 of 145