N-Tron 7014FX2, 7014TX, 7014FXE2 user manual Whoami, Ping, Hostip-address

“$”

Command Name	$
Description	This command copies the command identified by reference number
	<command no> from the history list into the next command line
	allowing the user to edit the command for corrections or changes.
Syntax	$<n>
Parameters	n
	The reference number of the command in the history list
	that has to be edited.
Examples
	N-TRON/Admin#[1]> whoaim
	As shown above the command whoaim was entered instead of whoami.
	To edit the already entered command do as follows.
	N-TRON/Admin#[2]> $1
	N-TRON/Admin#[2]> whoaim
	Now we can edit the command at the command prompt.
NOTES	After entering ‘$1’ at the prompt, it displays the previously entered
	command.
Whoami
Command Name	whoami
Description	This command displays the current operating mode of the user.
Syntax	whoami
Parameters	None
Examples	eg.1
	N-TRON/Admin#[5]>whoami
	admin	with privilege of Administrator
	eg.2
	N-TRON/User#[5]> whoami
	user	with privilege of User
NOTES
Ping
Command Name	ping
Description	To issue the ping request to a specified host.
Syntax	ping <hostip-address> [count]
Parameters	hostip-address
	IP Address of the host to give the ping request.
	count
	Count the number of times to give the ping request (range 5-50).
Example	ping 10.1.6.15
	ping 10.1.6.15 10
Notes

6/28/2007 page 97 of 145