VLAN – Port Based

The Port Based tab under the VLAN category shows all the VLANs that are configured on the switch and details about the VLANs such as port numbers and tagged VLAN settings.

To add a VLAN simply click on the Add button on the page above and fill in the desired fields. The example below would set up a basic port based VLAN for ports P1-P6.

(See VLAN Configuration Examples section)

Note:

1.When implementing overlapping VLANs, RSTP can only be enabled on one of the VLANs that is overlapping others. RSTP can not be implemented on a VLAN that contains other VLANs within that one. Changing anything on a VLAN will turn on RSTP on all VLANS as a precautionary measure.

2.VLANs on N-Ring ports are limited to VID=1 (default) or VID=2. All N-Ring ports must be on the same tagged VLAN.

3.VID=1 has to be Admit=ALL, and cannot be tagged only.

6/28/2007

page 39 of 145

Page 39
Image 39
N-Tron 7014TX, 7014FX2, 7014FXE2 user manual Vlan Port Based