N-Tron 7014FXE2 28/2007 110, Get Lock State, Get Auto-negotiation State, Set Priority State

Get Lock State

Command Name	port get lockstate
Description	Gets the lock state for a given port.
Syntax	port get lockstate <port-no>
Parameters	port-no
	port number (1 ~ 14).
Examples	N-TRON/Admin#[1]> port get lockstate 6
	LockState	: [enable]
	N-TRON/Admin#[2]> port get lockstate 14
	LockState	: [disable]
NOTES	Check whether port-nois in the valid range. (1 ~ 14)
Get Auto-negotiation State
Command Name	port get autonego
Description	Gets the auto negotiation mode for a given port.
Syntax	port get autonego<port-no>
Parameters	port-no
	Port number (1 ~ 14).
Examples	N-TRON/Admin#[1]> port get autonego 6
	Auto negotiation mode is : [enabled]
	N-TRON/Admin#[2]> port get autonego 12
	Auto negotiation mode is : [disabled]
NOTES	Check whether port-nois in the valid range. (1 ~ 14)
Set Auto-negotiation State
Command Name	port set autonego
Description	Sets the auto negotiation mode of a given port to either enable or disable. If
	the port auto negotiation mode is enabled, the switch can automatically
	adjusts it speed and duplex mode to the incoming speed and duplexmode.
Syntax	port set autonego <port-no><enable disable>
Parameters	port-no
	port number (1 ~ 12)
	enable disable
	Auto negotiation enable or disable
Examples	N-TRON/Admin#[1]> port set		autonego 6 enable
	Auto negotiation mode of port[6] is : [enabled]
	N-TRON/Admin#[2]> port set		autonego 7 disable
	Auto negotiation mode of port[7] is : [disabled]
NOTES	Check whether port-nois in the valid range. (1 ~ 12)
Set Priority State
Command Name	port set prioritystate
Description	Enables or Disables the Priority State on a per port basis.
Syntax	port set prioritystate <enable disable><port-no>
Parameters	port-no
	port number (1 ~ 14)
	enable disable
	Priority State enable or disable
Examples	N-TRON/Admin#[1]> port set prioritystate enable 6
NOTES	Check whether port-nois in the valid range. (1 ~ 14)

6/28/2007 page 110 of 145