N-Tron 7014FXE2 Mirroring related commands, 28/2007 116, Set Mirror config, Show Mirror config

Mirroring related commands

Set Mirror config

Command Name	mirror set config
Description	To the mirroring feature of the switch, for specified ports.
Syntax	mirror set config <dest-port> <src-ports>
Parameters	dest-port
	Destination port is the snooper port onto which the selected
	source ports traffic is to be mirrored.
	The gigabit ports cannot be destination ports.
	src-ports
	List of ports to be monitored.
Examples	N-TRON/Admin#[1]> mirror set config 1 2-5
NOTES	A mirroring port is a dedicated port that is configured to receive the copies
	of Ethernet frames that are being transmitted out and also being received in
	from any other port that is being monitored.
Enable or Disable Port Mirroring
Command Name	mirror set <enable disable>
Description	Enables or disables network monitoring or port mirroring. It treats source
	port as the Ethernet port and the destination port as a monitoring port.
Syntax	mirror set enable
Parameters	None
Examples	N-TRON/Admin#[1]> mirror set enable
	mirror enabled
	N-TRON/Admin#[1]> mirror set disable
	mirror disabled
NOTES
Show Mirror config
Command Name	mirror show
Description	To show all the mirror information.
Syntax	mirror show
Parameters	None
Examples	N-TRON/Admin#[1]> mirror show
	-------------------------------------------
	DEST PORT SOURCE PORTS MIRROR STATE
	-------------------------------------------
	5	2-4	ENABLED
	-------------------------------------------
NOTES

6/28/2007 page 116 of 145