N-Tron 7014FXE2, 7014TX, 7014FX2 user manual 28/2007 113

Get State Of Priority

Command Name	port get stateofpriority
Description	Displays the priority state of a given port number.
Syntax	port get stateofpriority <port-no>
Parameters	port-no
	port number (1 ~ 14)
Examples	N-TRON/Admin#[1]> port get stateofpriority 6
	Priority State of Port[6] is : [disabled]
NOTES	Check whether port-nois in the valid range. (1 ~ 14)
Get Intruder State
Command Name	port get intruderstate
Description	Displays whether the intruder log is enabled or disabled.
Syntax	port get intruderstate
Parameters	None
Examples	N-TRON/Admin#[1]> port get intruderstate
	Intruder Log : Disabled
NOTES
Get Priority Level
Command Name	port get prioritylevel
Description	Displays the priority level on a given port.
Syntax	port get prioritylevel <port-no>
Parameters	port-no
	port number (1 ~ 14)
Examples	N-TRON/Admin#[1]> port get prioritylevel 6
	Priority Level of Port[6] is : [1]
NOTES	Check whether port-nois in the valid range. (1 ~ 14)
Get STP Status
Command Name	port get STP Status
Description	Displays the Spanning Tree Protocol Status on a given port.
Syntax	port get stpstatus <port-no>
Parameters	port-no
	port number (1 ~ 14)
Examples	N-TRON/Admin#[1]> port get stpstatus 6
	Stp state of [6] port is : [Forward]
NOTES	STP states include: Listening, Learning, Blocking, & Forwarding
Get Back Pressure
Command Name	port get backpressure
Description	Displays the backpressure information on a given port number (enabled or
	disabled).
Syntax	port get backpressure <port-no>
Parameters	port-no
	port number (1 ~ 14)
Examples	N-TRON/Admin#[1]> port get backpressure 6
	Back Pressure is DISABLED
NOTES	Check whether port-nois in the valid range. (1 ~ 14)
Get PVID
Command Name	port get pvid
Description	Displays a given port’s VLAN-ID.
Syntax	port get pvid <port-no>
Parameters	port-no
	port number (1 ~ 14)
Examples	N-TRON/Admin#[1]> port get pvid 6
	PVID of port 6 is 4.
NOTES	Check whether port-nois in the valid range. (1 ~ 14)

6/28/2007 page 113 of 145