Index
©
National Instruments Corporation I-5 FieldPoint FP-3000 User Manual
PV_SCALE, C-16
RATE, C-16
RCAS_IN, C-17
RCAS_OUT, C-17
RESET, C-17
RESTART (table), C-17
ROUT_IN, C-17 to C-18
ROUT_OUT, C-18
RS_STATE (table), C-18
SAFEGUARD_CL, C-18
SAFEGUARD_OP, C-18
SET_FSTATE, C-19
SHED_OPT (table), C-19
SHED_RCAS, C-19
SHED_ROUT, C-19
SIMULATE, C-20
SP_HI_LIM, C-20
SP_LO_LIM, C-20
SP_RATE_DN, C-20
SP_RATE_UP, C-20
STATUS_OPTS (table), C-21
STRATEGY, C-22
ST_REV, C-20
TAG_DESC, C-22
TEST_RW, C-22
TRK_IN_D, C-22
TRK_SCALE, C-22
TRK_VAL, C-22
UPDATE_EVT, C-22
WRITE_ALM, C-22
WRITE_LOCK, C-22
WRITE_PRI, C-22
XD_SCALE (table), C-23
FIELDPOINT_CHANNEL parameter, 4-14
FIELDPOINT_MODULE parameter, 4-14
FIELD_VAL parameter, C-9
firmware for FP-3000
field upgradability, 1-4
updating, 2-15 to2-18
FP-3000 connector pinout (figure), 2-12
FP-3000 Network Module
features, 1-3 to1-4
overview, 1-1 to1-2
setup (figure), 1-2
FP_AI_100_RANGE parameter, 4-14
FP_AI_110_RANGE parameter, 4-14
FP_AI_111_RANGE parameter, 4-15
FP-AO-200 block, instantiating, 3-10
FP_AO_200_RANGE parameter, 4-15
FP_AUTOCONFIGURE parameter, C-9
FP_CJC_SOURCE parameter, 4-15
FP_MOD_LIST parameter, C-9
FP_MOD_STATUS parameter (table), 4-15
FP_NOISE_REJECTION parameter, 4-16
FP_PWM_520_PERIOD parameter, 4-16
FP_RTD_122_RANGE parameter, 4-16
FP_RTD_TYPE parameter, 4-16
FP-TC-120 block, creating, 3-7
FP_TC_120_CJ_RANGE parameter, 4-16
FP_TC_120_RANGE parameter, 4-16
FP_THERMOCOUPLE_TYPE
parameter,4-16
FREE_SPACE parameter, C-9
FREE_TIME parameter, C-9
FTP support, F-1
function blocks. See also blocks.
advanced features, D-1 to D-5
blocks used in PID control loops, 4-2
cascade initialization, D-1to D-4
bypassing, D-4
mode and status behavior, D-2 toD-3
parameter connections, D-1 t o D-2
remote cascades, D-3
converting 4-20 mA pressure sensor to
Fieldbus (example), 3-2 to3-3
fault state, D-4
mode shedding, D-4 t o D-5
overview, 1-3
purpose and use, 4-1to 4-2