Chapter 2 Installation and Configuration
FieldPoint FP-3000 User Manual 2-12
©
National Instruments Corporation
Figure 2-12. FP-3000 Connector Pinout
LED Indicators
The FP-3000 has four LED indicators: POWER, NETWORK,
PROCESS, and STATUS. Figure 2 -1 3 shows the LEDs on the FP-3000.
Figure 2-13. LEDs on the FP-3000
When power is applied, the POWER LED blinks green for approximately
seven seconds during the power on self test. If the self test passes, the
POWER LED turns solid green and the READY LEDs on each
I/O module are lit green. If the self test fails, the POWER LED is lit red
and the module enters an inactive state.
12345
6789
NC
NC
NC
NC
NC
NC
NC
Data +
Data –
NC = No Connection
POWER FF-H1 PORT
PROCESS
STATUS NETWORK
POWER FF-H1 PORT
PROCESS
STATUS NETWORK