Index
FieldPoint FP-3000 User Manual I-6
©
National Instruments Corporation
support for FieldPoint modules,
4-4to 4-5
types of function blocks, 4-2to 4-4
G
GAIN parameter, C-10
GRANT_DENY parameter, C-10
H
heating element, controlling (example),
3-10 to 3-12
assigning tag to new block, 3-10
bringing block online, 3-12
instantiating FP-AO-200 block, 3-10
scaling output, 3-11to 3-12
selecting module and channel, 3-11
setting output range, 3-11
setting up scheduling, 3-12
HI_ALM parameter, C-10
HI_HI_ALM parameter, C-10
HI_HI_LIM parameter, C-10
HI_HI_PRI parameter, C-10
HI_LIM parameter, C-11
HI_PRI parameter, C-11
HotPnP
avoiding damage to network module and
terminal bases (note), 2-14
inserting new I/O modules, 2-15
overview, 1-4
replacing I/O modules, 2-15
using during operation, 2-14 to2-15
I
initial power on procedure, 3-1
input range, setting
converting 4-20 mA pressure sensor to
Fieldbus (example), 3-4
temperature control with FP-3000
(example), 3-8
installation
connecting FP-3000 to Fieldbus network,
2-11 to 2-12
connecting power to FP-3000, 2-9 to2-10
Device Description file, 2-1 to2-3
HotPnP, 2-14 to2-15
LED indicators, 2-12to 2-14
mounting FP-3000 on DIN rail, 2-4 to2-6
connecting terminal bases, 2-5 to2-6
removing FP-3000, 2-6
mounting FP-3000 to a panel, 2-6t o 2-8
connecting terminal bases, 2-7 to2-8
removing FP-3000, 2-8
mounting I/O modules onto terminal
bases, 2-8
power-on-self test (POST), 2-10
updating FP-3000 firmware, 2-15 to2-18
instantiating blocks. See block instantiation.
interoperability of FP-3000, 1-4
I/O modules
installing with HotPnP, 2-14 to 2-15
inserting new I/O modules, 2-15
replacing I/O modules, 2-15
problems (table), B-3
IO_OPTS parameter (table), C-11 toC-12
L
L_TYPES parameter (table), C-12
LAS (Link Active Scheduler), 1-4
LAST_BLOCK_EVENT parameter (table),
4-16 to 4-17
LED indicators, 2-12 to2-14
description of LED states (table), 2-13
STATUS LED flashes and error
conditions (table), 2-14
Limit subfield values for status handling
(table), 4-10
LIM_NOTIFY parameter, C-12