Index
©
National Instruments Corporation I-7 FieldPoint FP-3000 User Manual
linearization types (table), C-12
Link Active Scheduler (LAS), 1-4
LO_ALM parameter, C-12
LO_LIM parameter, C-13
LO_LO_ALM parameter, C-13
LO_LO_LIM parameter, C-13
LO_LO_PRI parameter, C-13
LO_PRI parameter, C-13
LOG (FieldPoint Log Block) function
block, 4-4
LOW_CUT parameter, C-13
M
manual. See documentation.
MANUFAC_ID parameter, C-13
MAX_NOTIFY parameter, C-13
MEMORY_SIZE parameter, C-13
MIN_CYCLE_T parameter, C-13
mode and status behavior during cascade
initialization, D-2 to D-3
mode shedding for function blocks,
D-4t o D-5
options (table), D-5
MODE_BLK parameter and mode handling,
4-10 to 4-12, C-14 to C-15
Actual modes (table), 4-11to 4-12, C-14
Normal mode, 4-12, C-15
Permitted mode, 4-12, C-15
Target modes (table), 4-10to 4-11, C-14
module and channel selection
converting 4-20 mA pressure sensor to
Fieldbus, 3-3
temperature control with FP-3000
(example)
controlling heating element, 3-11
taking temperature readings, 3-7
mounting FP-3000. See installation.
N
network specifications, E-1
Normal mode, 4-12, C-16
NV_CYCLE_T parameter, C-15
O
OP_CMD_CXO parameter (table), C-15
OUT parameter, C-15
OUT_HI_LIM parameter, C-15
OUT_LO_LIM parameter, C-16
OUT_SCALE parameter (table), C-16
output
scaling (example), 3-11 to3-12
setting range (example), 3-11
P
Permitted mode, 4-12, C-15
PID control, 4-5 to4-6
function blocks in PID control loop, 4-5
overview, 1-3
PID Function Block Application dialog
box (figure), 4-6
temperature control with FP-3000
(example), 3-13 to 3-14
assigning tag to new block, 3-13
connecting PID to AI and AO blocks,
3-14
downloading and bringing loop into
Auto, 3-14 to3-15
instantiating PID block, 3-13
scaling the PID, 3-13
tuning the PID, 3-15
PID (Proportional-Integral-Derivative)
function block
description, 4-3
PID control loops, 4-5
Plug and Play. See HotPnP.
POST (power-on self test), 2-10