©NationalInstruments Corporation 2-1 NI6013/6014 User Manual
2
Installing and Configuringthe NI 6013/6014
This chapter explains how to install and configure the NI 6013/6014.

Installing the Software

Complete the following steps to install the software before installing the
NI 6013/6014.
1. Installthe ADE, such asLabV IEW,Measurement Studio, or
VILogger, according to the instructions on the CD and the release
notes.
2. InstallNI-DAQ according to the instructions on the CD and the
DAQQuick Start Guide included with the NI 6013/6014.
Note It is important to install NI-DAQbefore installing the NI 6013/6014 to ensure that
the NI 6013/6014 is properly detected.

Installing the Hardware

TheNI 6013/6014fits in any PCI system slot in the computer. However, to
achievebest noise performance, leave as much room as possible between
the NI 6013/6014 and other devices.
The followingare general installation instructio ns, butconsult the
computeruser manual or technical referencemanual forspecific
instructions and warnings.
Note Followthe guidelines in the computer document ation for installing plug-in
hardware.
1. Poweroff and unplug the computer.
2. Remove the cover.