©NationalInstruments Corporation 4-1 NI6013/6014 User Manual
4
Connecting Signals
This chapter describes how to make input and output signal connections
to the NI 6013/6014 using the I/O connector. Table 4-1 shows the cables
thatcan be used with the I/O connectors to connect to different accessories.
Caution Connectionsthat exceed any of the maximum ratings of input or output signals
on the NI 6013/6014 can damage the device and the computer.NI is not liable for any
damageresulting from such signal connections. The Protection column of Table 4-3 shows
the maximum input ratings for each signal.

I/O Connector

Figure 4-1 shows the pin assignments for the 68-pin I/O connector.
Refert o Appendix B, Custom Cabling and Optional Connectors, for pin
assignmentsof the optional 50- and68-pin connectors. A signal description
follows the figures.
Table4-1. I/O Connector Details
Devicewith I/O
Connector
Numberof
Pins
Cable for
Connecting
to 100-pin
Accessories
Cable for
Connecting
to 68-pin
Accessories
Cable for
Connecting to
50-pin Signal
Accessories
PCI-6013/6014 68 N/A SH6868Shielded
Cable,
SH68-68R1-EP
Shielded Cable,
R6868 Ribbon
Cable
SH6850Shielded
Cable,
R6850 Ribbon
Cable