NDC comm NWH4020 manual Adapter Properties window - Link Info panel

Link Info

This panel is divided into three sections:

•Type and Version — This section shows the version numbers of the driver and the adapter’s firmware, as well as the type of chipset in the adapter.

•Hardware Information — Shows the “regulatory domain” the adapter was made for (that is, the country or region it has the proper number and selection of channels for) and the “station address,” that is, the adapter’s factory-set MAC (Media Access Control) address. The “adapter bus type” entry is for adapters that plug into slots on a computer’s main board; this item always shows N/A (“not applicable”) for the NWH4020.

•Adapter Status — Shows the adapter’s current operational status, that is, whether it has a wireless connection or not, or if it is searching for a connection or in some other condition.

Link Info

Click the tab to view detailed information about any current wireless connection (Figure 17).

Figure 17. Adapter Properties window — Link Info panel

•State — The State box shows whether or not the station is “associated” with (that is, wirelessly connected to) an AP. If the station is connected, this box also shows the AP’s BSSID (Basic Service Set ID; this is also the AP’s MAC address).

18 InstantWave 11-Mbps USB Wireless LAN Adapter