| Advanced Menu |
|
|
Menu Item | Settings (default is bold) |
Floppy Disk Controller | Disabled, Enabled, Auto |
| Setting at Enabled allows the user to |
| configure the controller. |
| Setting at Auto enables the BIOS or |
| operating system to configure the controller. |
Base I/O Address | Primary, Secondary |
| Sets the base I/O address for the controller. |
Large Disk Access Mode | Other, DOS |
| Select DOS if using DOS operating system. |
| Select Other if using another operating |
| system such as UNIX or Novell NetWare. |
Local Bus IDE Adapter | Disabled, Primary, Secondary, Both |
| Enables the integrated local bus IDE |
| adapter. |
QuickBoot Mode | Disabled, Enabled |
| When Enabled, the BIOS does not test |
| system memory above 1 MB or wait for |
| ready signals, allowing a quick boot. |
Sound | Enabled, Disabled |
| Select Disabled to turn off onboard sound. |
DMI Event Logging | Press Enter to access the following |
| submenus. |
Event Log Capacity | Status only. |
Event Log Validity | Status only. |
View DMI Event Log | Status only, press Enter to view. |
|
|
