Solving Problems with Printing Quality100
If the problem is not resolved, even after all of the above have been
performed, contact Technical Support with the error information. Go to
www.minolta-qms.com/support/ or see the Service & Support Guide for
support telephone numbers.
The color
has a poor
reproduc-
tion or has
poor color
density.
The paper image
transfer is defective.
Check the OPC drum cartridge. If
necessary, replace the entire drum
cartridge.
The Auto-Image
Density Control
(AIDC) detection
sensor is dirty.
Clean the laser lens cover and perform
an AIDC calibration cycle through the
Engine/Service/Power On Test menu.
Wait until the test is finished and
IDLE/MAGICOLOR 2300DL is
displayed.
If the problem persists, contact
Technical Support. See the Service &
Support Guide for a list of sources of
service and support in the Americas.
The most up-to-date worldwide
information can be found at
www.minolta-qms.com.
Symptom Cause Solution