Output Tray26

Check your application to determine how to set your margins for duplex
printing.
1To print duplex (both sides of the sheet), load the media printing-side up.
aFor Tray 1, load the media with the top of the media toward the back of
the tray.
bFor Tray 2, load the media with the top of the media toward the right
side of the tray.
"# In autoduplexing, the back side is printed first and the front side is
printed last.
2Set the driver for the duplex layout you prefer.
Long Edge creates a document that flips horizontally as in a loose-leaf
notebook; Short Edge creates a document that flips vertically, as on a
clipboard.
3Click OK.

Output Tray

All media is output to the output tray on top of the printer. The face-down
output tray has a capacity of 200 sheets of 22 lb (80 g/m2) bond paper.
"# If the media is stacked too high, your printer may experience media
jams, excessive media curl, or static buildup.
"# Remove transparencies as soon as possible from the output tray to
avoid static buildup.

Media Storage

How do I store media?
!Keep media on a flat, level surface in its original wrapper until it is time to
load it.
Media that has been stored for a long time without staying in its packaging
may dry up too much and cause jamming.
!If media has been removed from its wrapper, place it in its original
packaging and store in a cool, dark place on a level surface.
!Avoid moisture, excess humidity, direct sunlight, excess heat (above
95° F/35° C), and dust
!Avoid leaning against other objects or placed in an upright position
Before using stored media, do a trial printing and check print quality.