Media Types14

Do not use thick stock that is
!Mixed with any other media in the media trays (as this will cause printer
jamming)

Envelopes

Print on the front (address) side only. Some parts of the envelope consist of
three layers of paper—the front, back, and flap. Anything printed in these
layered regions may be lost or faded.
Use envelopes that are
!Common office envelopes approved for laser printing with diagonal joints,
sharp folds and edges, and ordinary gummed flaps
"# Because the envelopes pass through heated rollers, the gummed
area on the flaps may seal. Using envelopes with emulsion-based
glue avoids this problem.
!Approved for laser printing
!Dry
!Printed on the front address side only
Do not use envelopes that have
!Sticky flaps
!Tape seals, metal clasps, paper clips, fasteners, or peel-off strips for
sealing
Driver
Mode
Thick stock
Weight 25–43 lb bond (91–163 g/m²)
Duplexing Not supported
Notes 43 lb (163 g/m²) bond is also referred to as 90 lb index stock.
Capacity Tray 1 Up to 50 envelopes, depending on their thickness
Tray 2 Not supported
Orientation Face up
Type Check www.minolta-qms.com/support (click on Answer Base)
for currently approved media. To order approved media, go to
www.q-shop.com.
Driver
Mode
Envelope
Weight 25–43 lb bond (91–163 g/m²)
Duplexing Not supported