Duplex Option118
6Attach the support wire for the duplex option to the printer.
aPull the right-side door release
lever, and open the right-side
door.
If you have lower feeder unit
attached, you first need to open
the lower right-side door.
bPull the tab for the support wire
on the right side of the duplex
option, and then hook the wire
onto the hook of the printer.
cClose the right-side door(s).
7Reconnect interface cable.
8Reconnect the power cord, and turn
on the printer.
"# In compliance with UL
guidelines, “The appliance inlet
is considered to be the main
disconnect device.”
9Check the configuration page from the
control panel (Special Pages/Print
Config Page menu) to verify the duplex option installation.
10 Configure your driver for the new duplex option (see Chapter 4).

%

%%

%

$

$$

$