Duplex Option 117

5Attach the duplex option to the
printer.
aHook the two tabs at the bottom
of the duplex option onto the
notches on the right side of the
printer.
bPush the duplex option toward the printer until it clicks on the top.
cWhile still supporting the duplex unit,
carefully open the right-side door,
and then check that the tabs on the
duplex unit are correctly hooked onto
the printer.
Attention
If the duplex option is released
before it is secured with the
screws, it may fall and break. Be
sure to keep the duplex option
supported until the screws are
tightened.
dOpen the duplex option’s cover and
tighten the two thumbscrews on the
duplex option to secure the unit to
the printer.
eClose the duplex option’s cover.