Repacking the Printer128
3Unhook the support wire.
4Close the right-side door.
5Open the duplex option’s cover and
loosen the two thumbscrews until the
duplex option moves freely away from
the right side of the printer.
6Lift duplex option up and away from the
printer.
7Install the original right-side cover that
came with the printer with two screws.
8Repack the duplex option in its original
shipping carton for storage or shipment.
"# If you’re returning the printer for
service, you don’t need to return the
duplex option, unless the problem is
with the duplex option.
Lower Feeder Unit
"# If you don’t have a lower feeder unit installed, skip to the next section.
1Slide tray 2 out of the printer and remove the media.