NDA-24318 CHAPTER 2
Page 11
Issue 1
CIRCUIT CARD EXPLANATIONS
2.5 Switch Settings
The meaning of each switch on this card is shown below:
IP-LINK Green Lights when establishing a connection (physically) with the IP network.
IP-TXRX Green Lights when sending/receiving data packets.
IP-100M Green Lights when 100 Mbps interface is in use.
IP-COL Yellow Lights when data packet collision is detected.
F-LRR Green Lights when this card is used with FCCS network.
F-LINK Green Lights when establishing a connection (physically) with the FCCS network.
F-TXRX Green Lights when sending/receiving data packets.
F-100M Green Lights when 100 Mbps interface is in use.
F-COL Yellow Lights when data packet collision is detected.
Table 2-2 Switch Setting Meanings
SWITCH
NAME SWITCH
NUMBER SETTING STANDARD
SETTING MEANING
MB - ON (UP) Circuit Card: Make-Busy.
- OFF (DOWN) ×Circuit Card: Make-Busy Cancel.
MBR - ON (UP) Circuit Card Make-Busy Request.
- OFF (DOWN) ×Circuit Card Make-Busy Request Cancel.
MODE
-0
×Auto Negotiation ON (standard setting).
- 1 Auto Negotiation OFF.
- 2 MAC Address Writing Mode.
-3-F Not used.
Table 2-1 Lamp Indication Meanings (Continued)
LAMP NAME COLOR MEANING OF INDICATION