CHAPTER 2 NDA-24318
Page 8
Issue 1
CIRCUIT CARD EXPLANATIONS
2.2 Mounting Location/Condition
Mounting location/condition of this card is shown below. Mount this card in the following shaded slots:
Figure 2-2 PA-8IPTB Circuit Card Mounting Locations
Mounting conditions of this card are as follows:
•When this card is used without a sub board (PZ-8VCTB), and mounted in any of the u niversal slots 05,
07, 09, 16, 18 or 20:
Although this card physically occupies only one slot, actual ports to be used are those in the even-
numbered group of only the left side of the slot (see Figure 2-3).
•When this card is used without a sub board (PZ-8VCTB), and mounted in any of the u niversal slots 10,
11, 12, 21, 22 or 23:
This card occupies only one slot. In regard to the port accommodation, see Figure 2-3.
•When this card is used with a sub board (PZ-8VCTB):
This card physically occupies a total o f two slots. In regard to the port acco mmodation, see Figure 2-3.
•One UNIT accommodates a maximum of two IPTRK circuit cards (slots 04~12 / slots 15~23).
Therefore, the third IPTRK circuit card must be accommodated in a different UNIT of the same/other
PIM.
00 01 02 03 04 05 06 07 08 09 10 11 13 14 15 16 17 18 19 20 21 22 2312
PIM
Universal Slots Universal Slots