NDA-24318 CHAPTER 3
Page 29
Issue 1
OFFICE DATA PROGRAMMING
3. FCCS NETWORKING VIA IP [F-36]
This feature allows the system to exchange both speech and FCCS signals via th e Intr ane t. It is not neces sary t o
use an FCH circuit card. To establish/release a call, the following connection patterns can be selected:
For both speech and FCCS signal channels, an IPTRK ci rcuit card is used. At this time, the IPTRK circuit cards
in the self-node and each of its connected node(s) must be in 1-to-1 ratio. See Section 2.4 Data Programming.
When utilizing Point-to-Multipoint Connection for both speech and FCCS signal channels, an IPTRK circuit
card is used. At this time, the IPTRK circuit card, accommodated in the self-node, can be con nected to multip le
destinations (IPTRK circuit cards of multiple nodes). See Section 2.4 Data Programming.
Figure 3-6 Overview of FCCS Networking via IP [F-36]
Both Speech and FCCS Signal
Intranet
IPTRK
NEAX2400 IPXNEAX2400 IPX
IPTRK
Node A Node B
Point-to-Multipoint Connection
Symbols:
IPTRK: IP Trunk
•FCCS network is used via the Intranet
•IPTRK: Point-to-Multipoint Connection
POWER
Router
POWER
Router