CHAPTER 2 NDA-24318
Page 16
Issue 1
CIRCUIT CARD EXPLANATIONS
When using an IPTRK circuit card for FCCS Networking via IP [F-36] (Point-to-Multipoint Connection),
connect an Ethernet cable from the IPCON connector to the router. Next, connect another Ethernet cable
from FCON connector to LANI card (CPR, PCI slot 00/03) via HUB. The following figure is an example
when connecting the IPTRK circuit card to the LANI of CPU0, PCI slot 0. When 100BASE-TX Ethernet
cable is connected to IPCON/FCON connector, IP100M or F-100M lamp lights green, respectively. Whe n
using 10BASE-T Ethernet cable, the lamp does not light.
Figure 2-6 Ethernet Cable Connection for FCCS Networking via IP [F-36] [IPTRK: Point-to-Multipoint]
5.0
A
5.0
A
slot3slot0
slot3slot0
8 Not used
7 Not used
6 RD -
5 Not used
4 Not used
3 RD +
2 TD -
1 TD +
0
2
4
A
C
E
6
BASEU
Intranet
RJ-45 Connector
PIN Assignment
IPCON/FCON
Ethernet Cable
(Installation Cable)
PA-8 IPT B IPCON
FCON
RJ-45
Ethernet Cable
(Straight Cable)
Ethernet Cable (Straight Cable)
HUB Circuit Card
PIM
LPM
LANI (PZ-PC19)
LANI (PZ-PC19)
POWER
Router
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required