1. INTRODUCTION
Top Features
4 | 5 | 7 | 8 |
|
|
| |
3 | LAMP |
|
|
STATUS |
|
| |
POWER |
|
| |
2 | SOURCE | SELECT |
|
| ON/STAND BY |
|
|
| AUTO |
|
|
| ADJ. |
|
|
1 6 9 10
1.ON/STAND BY button ( )Use this button to turn the power on and off when the main power is supplied and the projector is in standby mode.
To turn on the projector, press and hold this button for a minimum of two seconds. To turn off the projector, press this button twice.
2.POWER indicator (LED)When this indicator is green, the projector is on; when this indicator is orange, it is in standby mode. See the power Indicator section on page
If this light blinks red rapidly, it indicates that an error has occurred, the lamp cover is not attached properly or the projector has overheated. If this light remains orange, it indicates that you have pressed a cabinet key while the Cabinet Button is locked. See the Status Indicator section on page
If this light blinks red rapidly, it’s warning you that the lamp has reached the end of its usable life. After this light appears, replace the lamp as soon as possible (See page
This button will allow you to select a video source such as a PC, VCR or DVD player.
Press and quickly release this button to display the Source list. Each time this button is pressed, each source name will be highlighted in sequence. Highlighting a source name for 2 seconds without pressing the ENTER button will display the selected source.
6.AUTO ADJ. buttonUse this button to adjust an RGB source for an optimal picture (See page: Use these buttons to change the level of a selected menu item. When no menus appear, these buttons work as a volume control.
9.ENTER buttonExecutes your menu selection and activates items selected from the menu.10.EXIT buttonPressing this button will return to the previous menu.While you are in the main menu, pressing this button will close the menu.