5. USING ON-SCREEN MENU

Selecting Aspect Ratio [Aspect Ratio]

Aspect Ratio allows you to select the best Aspect mode to display your source image.

You can also display the Aspect Ratio window by pressing the ASPECT button on the remote control. (See page E-7).

NormalCinemaNative

When 4:3 is selected from the source (i.e. DVD player), the following selections will display:

Standard4:3 Aspect
Left and rightstretched
NormalCinema

When 16:9 is selected from the source (i.e. DVD player), the following selections will display:

16:9 image

Left and right

displayed in 4:3

stretched to display

mode

the true aspect

 

 

Native (RGB only): Turns off the Advanced AccuBlend feature. The projector displays the current image in its true resolution.

NOTE:

•When you are displaying an RGB image with a higher resolution than the projector's native resolution, the image will be displayed in "Normal" even if "Native" is selected. (Advanced Accublend will be incorporated)

Only when displaying an RGB image with a lower resolution than the projector's native resolution, will the image be able to be displayed in its true resolution "Native".

•When "Normal" is selected, an HDTV (1080i/720p) signal will be shown in its true aspect, as is the case when selecting "Cinema".

•You can adjust the image position for Cinema aspect. See “Cinema Position” for setting the image position.

Copyright

Please note that using this projector for the purpose of commercial gain or the attraction of public attention in a venue such as a coffee shop or hotel and employing compression or expansion of the screen image with a "Aspect Ratio" setting may raise concern about the infringement of copyrights which are protected by copyright law.

Adjusting the Vertical Position of Image [Cinema Position] (for Cinema only)

This feature adjusts the vertical position of the image when viewing video with Cinema aspect ratio selected. When “Cinema” is selected in “Aspect Ratio”, the image is displayed with black borders on the top and bottom. You can adjust the vertical position between top and bottom.

NOTE: This option is available only when “Cinema” is selected in Aspect Ratio.

E-36