7. TROUBLESHOOTING
7. TROUBLESHOOTING
This section helps you resolve problems you may encounter while setting up or using the projector.
Power Indicator
Indicator Condition | Projector Condition | Note | ||
| Off |
| The main power is off. | – |
Blinking light | Green | 0.5 sec On, | The projector is getting ready | Wait for a moment. |
|
| 0.5 sec Off | to turn on. |
|
|
| 2.5 sec On, | Off Timer is enabled. | – |
|
| 0.5 sec Off |
|
|
| Orange | 0.5 sec On, | The projector is cooling down. | Wait for a moment. |
|
| 0.5 sec Off |
|
|
Steady light | Green |
| The projector is turned on. | – |
| Orange |
| The projector is in Standby. | – |
|
|
|
|
|
Status Indicator |
|
|
| |
|
|
|
|
|
Indicator Condition | Projector Condition | Note | ||
| Off |
| Normal | – |
Blinking light | Red | 1 cycle | Lamp cover error or lamp hous- | Replace the lamp cover or lamp |
|
| (0.5 sec On, | ing error | housing correctly. |
|
| 2.5 sec Off) |
|
|
|
| 2 cycle | Temperature error | The projector is overheated. |
|
| (0.5 sec On, |
| Move the projector to a cooler |
|
| 0.5 sec Off) |
| location. |
|
| 4 cycle | Fan error | Fans will not work correctly. |
|
| (0.5 sec On, |
|
|
|
| 0.5 sec Off) |
|
|
|
| 6 cycle | Lamp error | Lamp fails to light. Wait a full |
|
| (0.5 sec On, |
| minute and then turn on again. |
|
| 0.5 sec Off) |
|
|
| Green |
| The projector is | |
Steady light | Orange |
| Cabinet button locked | You have pressed cabinet but- |
|
|
|
| ton when Cabinet Button is |
|
|
|
| locked. |
Lamp Indicator |
|
|
| |
|
|
|
|
|
Indicator Condition | Projector Condition | Note | ||
| Off |
| Normal | – |
Blinking light | Red |
| Lamp has reached its end of life. | Replace the lamp. |
|
|
| Lamp replacement message |
|
|
|
| will be displayed. |
|
Steady light | Red |
| Lamp has been used beyond its | Replace the lamp. |
|
|
| limit. The projector will not turn |
|
|
|
| on until the lamp is replaced. |
|
| Green |
| Lamp mode is set to Eco mode. | – |
