3. PROJECTING AN IMAGE (BASIC OPERATION)
FocusUse the Focus ring to obtain the best focus.Correcting the Vertical Keystone Distortion
The Keystone correction feature will correct the vertical distortion of a projected image on the screen.
NOTE: Keystone angle can be corrected between 15 degrees upward and 15 degrees downward of projector tilt from level.
To correct keystone distortion using the KEYSTONE +/- button:1.Press the KEYSTONE +/- button once to display the slide bar for adjustment.2.Press the KEYSTONE + or - to correct the keystone distortion.
OFFON
POWER
KEYSTONE
DOWN
MENU
You can also correct keystone distortion by using the menu.1.Press the MENU button to display the menu.2.Use the SELECT G or H to select “Image” and then “Keystone”.NOTE: When this option is highlighted, pressing the ENTER button will display its slide bar for adjustment.
3.Press the SELECT F or E to correct the keystone distortion.NOTE: You can save changes by using “Keystone Save” feature when you turn off the projector. See page