NEC LT180 Connecting Your VCR or Laser Disc Player, S-VIDEOIN, AUDIO IN, VIDEO IN, Audio equipment, VCR/ Laser disc player, Video cable (not supplied)

2. INSTALLATION AND CONNECTIONS

Connecting Your VCR or Laser Disc Player

S-VIDEO IN		AUDIO IN
AUDIO OUT	Y Cb/Pb	S-VIDEO IN
PC CONTROL MONITOR OUTCOMPUTER IN		L
	Cr/Pr
AUDIO IN	COMPONENT IN	IN R AUDIO IN
VIDEO IN
		AC IN

S-Video cable (not supplied)

Video cable (not supplied)

Audio equipment

VCR/ Laser disc player

L R	S-VIDEO VIDEO	AUDIO IN
AUDIO OUT	VIDEO OUT	L R

Audio cable (not supplied)

Use S-Video or RCA cables to connect your VCR, laser disc player or document camera to your projector. To make these connections, simply:

1.Turn off the power to the projector and VCR, laser disc player or document camera.

2.Connect one end of your RCA or S-Video cable to the video output connector on the back of your VCR or laser disc player, connect the other end to the VIDEO IN or S-VIDEO IN on your projector. Use an audio cable to connect the audio from your VCR or laser disc player to your audio equipment (if your VCR or laser disc player has this capability). Be careful to keep your right and left channel connections correct for stereo sound.

3.Turn on the projector and the VCR or laser disc player.

NOTE: Refer to your VCR or laser disc player owner's manual for more information about your equipment's video output requirements.

NOTE: An image may not be displayed correctly when a Video or S-Video source is played back in fast-forward or fast-rewind via a scan converter.

E-18