3. PROJECTING AN IMAGE (BASIC OPERATION)
Selecting a Source
Selecting the computer or video source
Using the cabinet buttons
LAMP
STATUS
POWER
SOURCE | SELECT |
ON/STAND BY
AUTO
ADJ.
Press the SOURCE button.
Press and quickly release the SOURCE button on the projector cabinet to display the Source list. Each time the SOURCE button is pressed, each source name will be highlighted in sequence.
Using the Remote Control
VIDEO COMPUTER AUTO ADJ.
VOLUME ASPECT HELP
PICTURE FREEZE
Press any one of the VIDEO ,
NOTE: If no input signal is available, the projector will display a blue background (factory preset).
Adjusting the Picture Size and Position
Place your projector on a flat level surface and ensure that the projector is square to the screen.
Lift the front edge of the projector to center the image vertically.
*If the projected image does not appear square to the screen then use the Keystone feature for proper adjust- ment. See page
