2. INSTALLATION AND CONNECTIONS
Connecting Your DVD Player
COMPONENT IN
| AUDIO IN OUT | Y |
|
| ||
PC CONTROL | MONITOR OUT | COMPUTER IN |
|
| L |
|
|
|
|
| |||
|
|
| Cr/Pr |
|
|
|
|
| AUDIO IN | COMPONENT IN | VIDEO IN | R | AUDIO IN |
|
|
|
|
| AC IN | |
Audio cable (not supplied) |
|
|
| Component video RCA×3 cable |
|
|
| ||
|
|
| (not supplied) | |
|
|
Audio Equipment
DVD player
AUDIO IN
L R
L R | Y Cb Cr |
AUDIO OUT | COMPONENT OUT |
Audio cable (not supplied)
You can connect your projector to a DVD player with component output or Video output. To do so, simply:
1.Turn off the power to your projector and DVD player.
2.If your DVD player has the component video (Y,Cb,Cr) output, use a component video cable (RCA × 3) to connect your DVD player to the COMPONENT IN connectors on the projector.
For a DVD player without component video (Y,Cb,Cr) output, use the
Use an audio cable to connect the audio from your DVD player to your audio equipment (if your DVD player has this capability). Be careful to keep your right and left channel connections correct for stereo sound.
3.Turn on the projector and DVD player.
NOTE: Refer to your DVD player’s owner’s manual for more information about your DVD player’s video output requirements.
