Base Module
2.4.6.3.DP (System Dump)
m | b | u |
X |
|
|
*The command is executable to the active partition (after automatic system boot/UP command execution).
Function:
This command causes a Dump interrupt to the system after a system dump is taken.
Whether a system dump is actually taken or not, or a system reset is subsequently activated or not, depends on the system software (OS or BIOS). This command only causes a Dump interrupt.
Nothing will happen, of course, if the software is not running.
(Screen Example)
| Description | |
| No. | |
| ||
Dump button interrupt will be generated. |
| |
Enter partition number | (a) | |
Execute OK? (y/[n]) y<ENTER> | (b) | |
DP command was accepted. Dump button interrupt will be generated soon. | (c) | |
[iSPyz:INFO.ccc] partition 0 : dump button interrupt. |
| |
[iSPyz:INFO.ccc] partition 1 : dump button interrupt. |
| |
: | (d) | |
: | ||
| ||
: |
| |
|
|
(Description)
Description | Description | |
No. | ||
| ||
(a) | Enter the target partition number here. | |
If “all” is specified, all the existing partitions are the target of this command. | ||
| ||
(b) | A confirmation message appears. | |
If you are sure to continue command execution, enter “y.” | ||
| ||
(c) | A “DP command accepted” message appears. | |
Actual processing progresses in the background. | ||
| ||
(d) | Shows progress in the background. |
