Base Module

2.2.10.DVD-ROM Unit

One DVD-ROM unit can be installed for each I/O module. A DVD-ROM unit is mounted on each I/O module in the main cabinet as standard equipment. The DVD-ROM and CD-ROM media can be used on the DVD-ROM unit.

2.2.10.1. Loading and Unloading Media

(1)Loading DVD-ROM/CD-ROM

1)Remove the front filter cover of the I/O enclosure (loosen the hand screw).

2)Push the Eject button lightly, and the tray pops out.

3)Place DVD-ROM/CD-ROM securely on the tray.

4)Push the Eject button lightly, and the tray goes back in the drive.

(2)Unloading DVD-ROM/CD-ROM

1)Be sure that the DVD-ROM drive access indicator LED (orange) goes off.

2)Push the Eject button lightly, and the tray pops out.

3)Take out DVD-ROM/CD-ROM.

CAUTION

Be careful not to touch the tray while it recesses in the drive unit to prevent hand injury.

Figure 2-10 Loading and Unloading DVD-ROM/CD-ROM

855-900547-200

2-10

Page 46
Image 46
NEC TX7/i9610, NX7700i/5040H-32, NX7700i/5080H-32 operation manual DVD-ROM Unit, Loading and Unloading Media