NEC VT 300i manual 44/1.25 MB 3 1/2

	Main Menu Items
Menu Item	Settings (default is bold)
Cache RAM	This field is read-only and cannot be changed from the BIOS Setup
	utility.
	Example: 128 KB
Total Memory	This field is read-only and cannot be changed from the BIOS Setup
	utility.
	Example: 32 MB
DRAM Bank 0	These fields are read-only and cannot be changed from the BIOS
DRAM Bank 1	Setup utility.
	Example:
	DRAM Bank 0 32 MB SDRAM
	DRAM Bank 1 None
System Date	Set system date in this field. Press Tab or Enter to move between
	month, date, and year fields.
	Example:
	Jan 20 1999
System Time	Set system time in this field. Press Tab or Enter to move between
	hour, minute, and second fields.
	Example: 09:30:00
Floppy Drive A:	Disabled
	360 KB 5 1/4"
	1.2 MB 5 1/4"
	720 KB 3 1/2"
	1.44/1.25 MB 3 1/2"
	2.88 MB 3 1/2"
Floppy Drive B	Not Installed
Primary IDE Master	Device type, Auto
Primary IDE Slave	Device type, Auto
Secondary IDE Master	Device type, Auto
Secondary IDE Slave	Device type, Auto
	Each device menu item displays the Hard drive or CD-ROM
	identifier if a device is installed.
	If you install a hard drive that does not feature auto IDE type
	detection or your IDE hard drive was formatted on another system
	with parameters different from those reported by the drive, enter a
	parameter for each of the fields in the device submenu.
	Bring up a device submenu by pressing Enter. The submenus
	include Type, Cylinders, Write Precompensation, Heads, Sectors,
	LBA Mode, Block Mode, Fast Programmed I/O Modes, and 32-Bit
	Transfer Mode. Each mode is briefly described in the following.

System Configuration 2-11