System Board 4-3
Internal Connectors and Sockets
Locations of the internal connectors and sockets on the syste m board ar e sho wn
in the following figure.
System Board Internal Connector and Socket Locations
A – AGP Board Connector E – Memory Sockets 1 and 2
B – PCI Connectors F – Diskette Drive Connector
C – ISA Connector G – Secondary IDE Connector
D – Processor Socket H – Primary IDE Connector
System Board Jumpers
The system board contains four configuration jumper blocks:
Processor/Bus Speed jumper block SW1
Power On Mode jumper block JP1
Clear CMOS jumper block JBAT1
Wake-Up on LAN jumper block JWOL.
The following figure shows the location of the jumper blocks on the system
board. To reset the jumper blocks, see the following paragraphs. (The factory-
set jumper settings are included in Section 2, “System Configuration.”)