3-14 Disasse mbl y and Reassembly
2. Align the replacement cartridge with the top of the retention mechanism so
that the notch in the cartridge connector aligns with the key in the Slot 1
connector.
Installing the Celeron or Pentium III Processor Cartridge
A – Processor Cartridge C – Slot 1 Connector
B – Retention Mechanism D – Key
3. Insert the cartridge into the retention mechanism and evenly press down on
the cartridge until it fully seats in the Slot 1 connector.
4. If the processor cartridge has an attached cooling fan, plug the fan cable into
its connector (CPUFAN) on the system board.
5. Set the processor jumpers on the system board for t he processo r t ype
installed (see “Processor Jumper Settings” in Section 2).
6. Reinsta ll a ny expansio n boards t hat may have bee n removed.
7. Replace the left side cover (see “Replacing the Left Side Cover” earlier in
this se ctio n).
8. Co nnect any peripherals and power cords, and power up the system.