If you Choose “Static IP”, the Static IP settings page will appear, shown in figure 4-8:

Figure 4-8 Quick Setup - Static IP

Note - The IP parametersshould have been provided by yourISP.

IP Address - This is the WAN IP address as seen by external users on the Internet (including your ISP). Enter the IP address into the field.

Subnet Mask - The Subnet Mask is used for the WAN IP address, it is usually 255.255.255.0

Default Gateway - Enter the gateway IP address into the box if required.

Primary DNS - Enter the DNS Server IP address into the boxes if required.

Secondary DNS - If your ISP provides another DNS server, enter it into this field.

Note - Forotherconnection types please referto section 5.4.2

NB504 UserGuide

YML864Rev1

16

www.netcomm.com.au

Page 16
Image 16
NetComm NB504 manual Quick Setup Static IP