5.4.3 MAC Clone
You can configure the MAC address of the WAN port on this page, figure
Figure 5-13 MAC Address Clone
Some ISPs require that you register the MAC Address of your adapter, which is connected to your cable, DSL modem or Ethernet during installation. Changes are rarely needed here.
•WAN MAC Address - This field displays the current MAC address of the WAN port, which is used for the WAN port. If your ISP requires that you register the MAC address, please enter the correct MAC address into this field. The format for the MAC Address is
•Your PC’s MAC Address - This field displays the MAC address of the PC that is managing the router. If the MAC address is required, you can click the Clone MAC Address button and this MAC address will fill in the WAN MAC Address field.
Click Restore Factory MAC to restore the MAC address of WAN port to the factory default value. Click the Save button to save your settings.
Note:
1)Only the PC on your� LAN can use the MAC Addr�ess Clone featur�e.
2)If you click the Save button, the r�outer� will pr�ompt you to r�eboot.
YML864 Rev1 | ����NB504 ��User�� Guid����e |
www.netcomm.com.au |
