7.If you choose L2TP, you should enter the following parameters (figure
Figure 5-11 L2TP Settings
•User Name/Password - Enter the User Name and Password provided by your ISP. These fields are
•Dynamic IP/ Static IP – Choose either as you are given by your ISP.
Click the Connect button to connect immediately, Click the Disconnect button to disconnect immediately.
•Connect on Demand - You can configure the router to disconnect from your Internet connection after a specified period of inactivity (Max Idle Time). If your Internet connection has been terminated due to inactivity, Connect on Demand enables the router to automatically
Caution: Sometimes the connection cannot be disconnected although you specify a time to Max Idle Time, since some applications is visiting the Inter�net continually in the backgr�ound.
•Connect Automatically - Connect automatically after the router is disconnected. To use this option, click the radio button.
•Connect Manually - You can configure the router to make it connect or disconnect manually. After a specified period of inactivity (Max Idle Time), the router will disconnect from your Internet connection, and you will not be able to
Caution: Sometimes the connection cannot be disconnected although you specify a time to Max Idle Time, since some applications ar�e visiting the Inter�net continually in the backgr�ound.
NB504 User� Guide | YML864Rev1 |
30 | www.netcomm.com.au |