NetComm I want to use Netmeeting, what do I need to do?, NB504 User Guide, Figure A-6 DMZ

3.I want to use Netmeeting, what do I need to do?

1)If you start Netmeeting as a sponsor, you don’t need to do anything with the router.

2)If you start as a responsor, you need configure Virtual Server or DMZ Host.

3)How to configure Virtual Server: Login to the router, click the “Forwarding” menu on the left of your browser, and click “Virtual Servers” submenu. On the “Virtual Server” page, click Add New, then on the “Add or Modify a Virtual Server” page, enter “1720” into the blank behind the “Service Port”, and your IP address behind the IP Address, assuming 192.168.1.169 for an example, remember to “Enable” and “Save”.

Figure A-4 Virtual Servers

Figure A-5 Add or Modify a Virtual server Entry

Note: Your� opposite side should call your� WAN IP, which is displayed on the “Status” page.

4)How to enable DMZ Host: Login to the router, click the “Forwarding” menu on the left of your browser, and click “DMZ” submenu. On the “DMZ” page, click “Enable” radio and type your IP address into the “DMZ Host IP Address” field, using 192.168.1.169 as an example, remember to click the “Save” button

Figure A-6 DMZ

4.I want to build a WEB Server on the LAN, what should I do?

1)Because the WEB Server port 80 will interfere with the WEB management port 80 on the router, you must change the WEB management port number to avoid interference.

2)To change the WEB management port number: Login to the router, click the “Security” menu on the left of your browser, and click “Remote Management” submenu. On the “Remote Management” page, type a port number except 80, such as 88, into the “Web Management Port” field. Click “Save” and reboot the router.

NB504 User� Guide	YML864Rev1
80	www.netcomm.com.au