RangeMax Dual Band
Table 4-3. Modem Router Statistics (continued)
Item | Description | |
|
|
|
| Status | The link status of the port. |
|
|
|
| TxPkts | The number of packets transmitted on this port since reset or manual clear. |
|
|
|
| RxPkts | The number of packets received on this port since reset or manual clear. |
|
|
|
| Collisions | The number of collisions on this port since reset or manual clear. |
|
|
|
| Tx B/s | The current transmission (outbound) bandwidth used on the WAN and LAN ports. |
|
|
|
| Rx B/s | The current reception (inbound) bandwidth used on the WAN and LAN ports. |
|
|
|
| Up Time | The time elapsed since this port acquired the link. |
|
|
|
Poll Interval | The intervals at which the statistics are updated in this screen. | |
|
|
|
•To change the polling frequency, enter a time in seconds in the Poll Interval field, and click Set Interval.
•To stop the polling, click Stop.
Viewing a List of Attached Devices
The Attached Devices table lists all IP devices that the modem router has discovered on the local network. From the main menu, under Maintenance, select Attached Devices to view the table.
Figure
For each device, the table shows the IP address, NetBIOS host name or device name (if available), and the Ethernet MAC address. To force the modem router to look for attached devices, click Refresh.
Note: If the router is rebooted, the table data is lost until the modem router rediscovers the devices.
Using Network Monitoring Tools |
