ProSecure Web/Email Security Threat Management Appliance STM150 Reference Manual
Default IP Address, Login Name, and Password Location
Check the label on the bottom of the STM150’s enclosure if you need a reminder of the following factory default information:
IP Address
User Name
Password
Figure
Choosing a Location for the STM150
The STM150 is suitable for use in an office environment where it can be
When deciding where to position the STM150, ensure that:
•It is accessible and cables can be connected easily.
•Cabling is away from sources of electrical noise. These include lift shafts, microwave ovens, and air conditioning units.
•Water or moisture cannot enter the case of the unit.
•Airflow around the unit and through the vents in the side of the case is not restricted. Provide a minimum of 25 mm or 1 inch clearance.
•The air is as free of dust as possible.
•Temperature operating limits are not likely to be exceeded. Install the unit in a clean, air- conditioned environment. For information on the recommended operating temperatures for the STM150, refer to Appendix A, “Default Settings and Technical Specifications.
Introduction |
