NETGEAR STM150EW3-100NAS manual Https Scan Settings, Http Tunneling

ProSecure Web/Email Security Threat Management Appliance STM150 Reference Manual

HTTPS Scan Settings

To configure the HTTPS scan settings, go to Web Security > HTTPS Scan > Settings.

Figure 4-12

To configure the HTTPS scan settings, click Web Security > HTTP and HTTPS > HTTPS Settings, and set the following options.

HTTP Tunneling

Check the box to allow and scan HTTPS connections through a HTTP proxy. Be sure to add the proxy port into the Ports to Scan for the HTTPS protocol in the Policy page.

HTTPS Third Party Website Certificate Handling

In addition to the trusted certificates, you have an option to grant access to the certificates that were not signed by a trusted CA. Normally if the certificate does not satisfy all three points

Customizing Scans 4-19

v1.1, March 2009