![](/images/new-backgrounds/1166371/16637179x1.webp)
ProSecure Web/Email Security Threat Management Appliance STM150 Reference Manual
•In Contact (optional), type the name of the person or department responsible for managing the STM150 appliance.
•In Location (optional), type the physical location of the STM150 appliance.
3.In Trusted SNMP hosts, type the IP addresses of the computers to which you want to grant GET and SET privileges on the STM150. Only the computers with IP addresses listed here will be able to enable/disable services, reboot the STM150, and reset accumulated its statistics.
4.In SNMP trap, type the IP addresses of the SNMP management stations to which you want SNMP traps to be sent.
5.Click Apply.
Supported MIB Browsers
After you configure the SNMP settings, the only other thing that you need to do is add the IP address of the STM150 into the management information base (MIB) browsers on which you want to receive the SNMP notifications. Refer to documentation of your MIB browser for instructions.
The following are recommended MIB browsers for receiving the STM150 SNMP notifications:
•
•SNMP
•
•SNMP Browser for KDE
The STM150 MIB structure is automatically downloaded by management stations. You should start receiving notifications after you enable SNMP on the STM150 and add the its IP address into your MIB browsers.
Defining Trusted SNMP Hosts
In Trusted SNMP hosts, type the IP addresses of the computers to which you want to grant GET and SET privileges on the STM150. Only the computers with IP addresses listed here will be able to access the SNMP features of STM150.
To define SNMP Traps
In SNMP trap, type the IP addresses of the SNMP management stations to which you want SNMP traps to be sent.
Performing System Management Tasks |