NETGEAR STM150EW3-100NAS manual Performing System Management Tasks, Modifying System Settings

ProSecure Web/Email Security Threat Management Appliance STM150 Reference Manual

Chapter 3 Performing System Management Tasks

This chapter provides information on other tasks that you can perform after setting up and configuring the STM150.

This chapter contains the following sections:

•“Modifying System Settings” on page 3-1

•“Backing Up and Restoring Configurations” on page 3-11

•“Resetting to Factory Defaults” on page 3-13

•“Restarting the STM150” on page 3-13

•“Enabling Remote Management” on page 3-14

•“Administering Software Updates” on page 3-15

•“Applying a Software Update that Requires a Reboot” on page 3-17

Modifying System Settings

This section covers modifying the settings you initially set in the Setup Wizard, or making other system settings changes.

Configuring Network Settings

A valid IP address is required for the STM150 to retrieve online updates. It is also needed for access to the STM150 management web GUI. Go to Global Settings > Network Setting to enter the system name and other network settings.

Performing System Management Tasks 3-1

v1.1, March 2009