NETGEAR STM150EW3-100NAS manual Resetting to Factory Defaults, Restarting the STM150

ProSecure Web/Email Security Threat Management Appliance STM150 Reference Manual

Resetting to Factory Defaults

Warning: If you reset the unit, all configuration settings will be lost, the default password will be restored, and you will need to re-register the product license.

You can use the default button on the Backup & Restore Settings page to revert to factory default settings, or you can use the reset button on the back of the unit.

Reset button

Figure 3-9

Use the Reset button to restore the factory defaults. Use a sharp object, press and hold this button for about ten seconds until the front panel Test light flashes to reset the unit to factory default settings.

Restarting the STM150

Restarting the STM150 will temporarily terminate all network connections that pass through it. Network connection is restored as soon as the restart and startup processes are completed, usually within a minute or two.

Restart button

Figure 3-10 New Photo

On the rear panel, press the Restart button: this restarts the unit; it does not reset the appliance to its factory defaults.

Performing System Management Tasks 3-13

v1.1, March 2009