User’s Guide for the WAB102 802.11a+b Dual Band Wireless Access Point
Basic Configuration
The WAB102 802.11 a+b Dual Band Wireless Access Point can be configured remotely from Microsoft Internet Explorer browser version 5.0 or above, or Netscape Navigator web browser version 4.78 or above on your computer.
Note: For
www.netgear.com.
1.Determine the name of your access point.
To find the name of your access point, refer to the labels on the bottom of the access point. The access point name should be similar to this, netgear10d4b5.
2.Open a web browser such as Internet Explorer or Netscape Navigator.
3.In browser Address or Location box, type in the name of your access point, and press enter. You do not need to include "www" or "http://."
Note: There is no space required between “netgear” and the 6 digits of the access point name.
Once you have entered your access point name, your web browser should automatically find the WAB102 dual band AP and display the home page, as shown above.
You may also access the WAB102 home page by specifying either the IP address or the WAB102 name as printed on the bottom of the device.
14 | Setting Up Basic Wireless Connectivity |
