NETGEAR WG511U user manual Preparing Your PCs for Network Access

User’s Manual for the NETGEAR Double 108 Mbps Wireless PC Card 32-bit CardBus WG511U

1.On the Windows taskbar, click the Start button, point to Settings, and then click Control Panel.

2.Double-click the Network icon.

The Network window opens, which displays a list of installed components:

You must have an Ethernet adapter or an WG511U, the TCP/IP protocol, and the Client for Microsoft Networks.

Note: It is not necessary to remove any other network components shown in the Network window in order to install the adapter, TCP/IP, or Client for Microsoft Networks.

If you need to add TCP/IP:

a.Click the Add button.

b.Select Protocol, and then click Add.

c.Select Microsoft.

d.Select TCP/IP, and then click OK.

If you need to add the Client for Microsoft Networks:

a.Click the Add button.

b.Select Client, and then click Add.

c.Select Microsoft.

d.Select Client for Microsoft Networks, and then click OK.

If you need to add File and Print Sharing for Microsoft Networks:

C-2 Preparing Your PCs for Network Access

August 2004