User’s Manual for the NETGEAR Double 108 Mbps Wireless PC Card 32-bit CardBus WG511U

Insert the NETGEAR Double 108 Mbps Wireless PC Card 32-bit CardBus WG511U.

a.Locate an available CardBus slot on the side of your notebook. Hold the PC Card with the NETGEAR logo facing up and insert it into the CardBus slot.

After a short delay, the Found New Hardware Wizard displays.

Follow the prompts to complete the wizard.

b.Next you will be prompted to enable the NETGEAR Smart Wireless Settings Utility configuration utility.

Click Yes to accept this option.

If you choose No, you must read the Windows XP documentation for an explanation of how to use the Windows XP wireless network configuration utility

You will also be prompted to choose the country you are located in. Select your location from the list.

c.Click Finish to complete the installation. You will see the WG511U system tray icon on the lower right portion of the Windows task bar.

Found New Hardware Wizard

Note: Click Continue Anyway if you are prompted with a Windows XP Logo testing message.

Enable NETGEAR Utility Configuration

WG511U System Tray Icon

Basic Setup

3-5

August 2004

Page 23
Image 23
NETGEAR WG511U user manual Basic Setup